Manual stripping machine for flat and round enamelled wires
Brush machine, used to remove enamel from 0.15 to 6.00 mm diameter wires
Round cables, but also flats.
The knurled screw allows the adjustment of the spacing of the brushes to ensure stripping to the correct diameter.
Usage: The wire must be inserted from the front or side, pulling on the wire and the procedure is completed.
HQ machines are equipped with brushes with the same direction of rotation, so there is no tension on the wire itself.
HQ 30
Technical data :
For round wire 0,15 – 2,0 mm Ø
Weight 1.9 kg
Power supply 230 V, 50 Hz or 115 V, 60 Hz
Brush diameter 30 mm
HQ 35
Technical data :
For round wire 1,5- 6 mm Ø
For flat wire 1 – 6 mm thick
Weight 2.2 kg
Power supply 230 V, 50 Hz or 115 V, 6 0 Hz
Brush diameter 35 mm
78 Rue Raymond Poincaré
92000 Nanterre – FRANCE
Tél. +33(0)1 40 86 00 09
Abfräsfix
