Tinning Automat TP 60P

Automatic tinning.
The TP 60P allows premium quality results thanks to its adjustable settings.

Principle:

This robot allows the conveying of components during tinning, gold and enamel removal or fluxing operations and monitors the following parameters: Input speed, Exit speed, Pre-heating time, Immersion time

Benefits:

Thanks to its very precise parameters, it allows to avoid bridges that can be found between the components legs at the tinning exit.

This programmable robot is conform to the norm NF C 20 720 related to procedures of solderability tests.

Other examples of use:

- Allows the tinning of components tinned before with tin/lead alloy to make them compliant with the RoHS norms.
- Type of Components : axial and radial components, SMT, DIP, PLCC, QFP etc

 

Video Demonstration
Demonstration on a SMT component Steps of the component tinning Demonstration on a DIP component

Le contenu de cette page nécessite une version plus récente d'Adobe Flash Player.

Obtenir le lecteur Adobe Flash

1. Placement of the components on the support

Le contenu de cette page nécessite une version plus récente d'Adobe Flash Player.

Obtenir le lecteur Adobe Flash

2. Fluxing of components
3. Placement of the support on the machine

4. Setting of the following parameters :

- Input speed
- Exit speed
- Pre-heating time
- Immersion time

5. Robot start-up
Your components are tinned without bridges !
Differents applications of the tinning automat
double_tinning-bath-with-tinning-machine-tp60p
Example of tinning automat
mounted on a double solder bath
Tinning-machine--tp60p
Example of a tinning automat
mounted on a 300 x 90 solder bath
Tinning-robot-TP60P
Example of tinning automat
mounted on a 300 x 90 solder bath
Pantograph
manual-pontograph-for-tinning-bath
Hand Pantograph
When timing constraints are low, the pantograph is used for tinning operations and gold or enamel removal of serial components. Tinning_bath_with_pontograph
Pantograph mounted
on a solder bath