Fume Extraction system HI4P4S

Fume Extraction System : HI4P4S

Application in laboratory : the fume extractor HI4P4S with its different options.

• Multi-workstation filtration for welding fumes and other ...
• Solvents applications with cloth or brush
• Capture of small dust particles to the grindstone
• Connections on various machines emitting fumes or solvents, such as digital printing machines, machines electro-mechanical ... etc ...

Can be used:

• recycling or ductless : Filtration with active carbon (see filters BOARD) or dust filter
• evacuation outside (filter for evacuation outside + exhaust duct Ø 125 mm)

Possibility of using protection prefilters.

Fume Extractor HI4P4S

Fume Extraction system HI4P6S

Fume Extraction System : HI4P6S

Application in laboratory : the fume extractor HI4P4S with its different options.

Fume extraction system with 6 extraction entries of diameter 50mm, delivered with 6x3m of ringed PVC pipe

• Multi-workstation filtration for welding fumes and other ...
• Solvent applications with cloth or brush
• Connections on various machines emitting fumes or solvents, such as digital printing machines, machines electro-mechanical ... etc ...

Can be used:

• recycling or ductless : Filtration with active carbon (see filters BOARD) or dust filter
• evacuation outside (filter for evacuation outside + exhaust duct Ø 125 mm)

Possibility of using protection prefilters.

Fume Extractor HI4P6S

ACCESSORIES

Fume Extraction Plate AP1

Fume Extraction plate linked to the fume extractor HI4P6S

Free the workstation

It is directly laid on the workstation, the adjustable visor allows to channel the flow

Use:

• Aspiration from the front for solvents, fumes or chemicals handling ...

To Use with fume extraction system HI4P6S

Fume Extraction Plate AP2

Fume Extraction plate linked to the fume extractor HI4P4S

Application in laboratory : the fume extractor HI4P4S with its different options.

It is directly laid on the workstation

No installation needed

It's simply connected by using a 80 mm diameter pipe

Low thickness: 8mm

Use:

• Aspiration from the bottom, heavy solvents or light smokes

To Use with fume extraction system HI4P4S

Flexible extraction arms linked to the fume extractor HI4P4S

Flexible extraction arms 

These innovative flexible extraction arms are ideally suited for mobile or temporary installations. They are adjustable by hand and can be positioned very easily. Their articulated multi-section design means that they can be shortened or lengthened to suit each application. 
  The extensive range includes several models with extraction nozzles, work surface consoles and brackets. The outer diameter is 74.5mm and the minimum curve radius is 146mm

DOCUMENTATION flexible EXTRACTION ARMS

TO USE WITH FUME EXTRACTION SYSTEM HI4P4S

STANDARD EXTRACTION ARM

POLYPROPYLENE EXTRACTION ARM

ESD EXTRACTION ARM

ATEX EXTRACTION ARM

Extraction arm : table mount

Extraction arm : wall mount

Extraction arm : ceiling mount

These articulation arms form a comprehensive extraction system with a complete range of extraction and connection accessories for attachment to :

- a table mount

- a wall mount

- a ceiling mount

As a premium quality, specialist manufacturer we fit our friction joint
articulations with ball bearings rotating through 360°.

Extraction arms are available in three diameters:

- 50mm

- 75 mm

- 100mm

50,75 and 100mm for our “Standard” range.

50 & 75mm for our “ESD” ranges.

A 75 mm & 100mm diameter is available for the PP:polypropylene” range and "Atex" range.

In addition, all the extractor arms are available is a variety of different lengths covering all possible configurations.

^{DOCUMENTATION Extraction arms}

Table mount :

Wall mount :

Ceiling Mount :

Different examples of application