DUCTLESS FUME HOOD
Auxiliary hoods are generally used for small needs of filtration
The ductless fume hoods HI8 is declined in two models, with a constant or a variable flow, and also with the possibility to fix each of these two models with an articulated arm
« constant flow » Ductless fume Hood HI8F  |
Ductless fume hood HI8F
Technical characteristics |
Fixed flow
Capacity
LxWxH mm
Weight
Power supply
Maintenance |
240 m3/h
85 W
240 x 300 x 200 mm
2,5 Kg
230V / 50 Hz
Periodic change of the filter |
|
Suitable for small filtration which does not requiere any flow variation, just has to be laid on bench next to the emanations source, or otherwise, it can be mounted on an articulated arm.
Very easily movable due to its low weight (2.5 kg)
EXAMPLE OF APPLICATION:
-
Treatment of solvents, fumes,
-
application of adhesives
-
small dust particles
-
odors or small fumes, etc ...
Can be used in recycling:
-
Active carbon filtration
-
Dust filter
-
(See filters BOARD)
Possibility of using protection prefilters .
|
 |
« variable flow » Ductless fume Hood HI8V |
Ductless fume hood HI8V
Technical characteristics |
Fixed flow
Capacity
LxWxH mm
Weight
Power supply
Maintenance |
0 to 240 m3/h
85 W
240 x 300 x 200 mm
2,5 Kg
230 V / 50 Hz
Periodic change of the filter |
|
Suitable for small filtration which needs a flow variation, just has to be laid on a bench next to the emanations source, orotherwise, it can be mounted on an articulated arm.
Very easily movable thanks to its low weight (2.5 kg)
EXAMPLE OF APPLICATION:
-
Treatment of solvents, fumes,
-
application of adhesives
-
small dust particles
-
odors or small fumes, etc ...
Can be used in recycling:
-
Active carbon filtration
-
Dust filter
-
(See filters BOARD)
Possibility of using protection prefilters. |
 |
Articulated arm BHI8 for ductless fume hoods HI8F or HI8V
|
Ductless fume hood with articulated arm |
Fixation arm for ductless fume hoods HI8f or HI8v, its use allows to free the workstation which is often already occupied by the operator’s equipment
|
|
