
ABSAUGHAUBE VON OBEN
Overhead hoods are generally used for the capturing of light fumes and solvent emissions releasing the workstation
ABSAUGHAUBE VON OBEN HI9P |


ABSAUGHAUBE VON OBEN HI9P
Technical characteristics |
Variable flow
Capacity
L x W x H mm
Weight
Integrated lighting
Power supply
Maintenance
rear exit evacuation |
50 to 450 m3/h
320 W
720 x 640 x 290 mm
12 Kg
Yes
230 V / 50 Hz
Periodic change of the filter
Yes Ø 125 mm |
|
The workstation is completely clear, to be suspended thanks to 4 chains
Visor in translucent PVC, 720 x 640mm
Application:
The aspirant group, as well as the filter may be provided independently without visor for rollover machine. For machining dimensions for the installation, please contact us ...
Can be used:
Possibility of using protection prefilters.
ABSAUGHAUBE VON OBEN HI9P |
 |
ABSAUGHAUBE AUF DUN GRUND
Built-in hoods are generally used for needs of filtration when the workstation is encumberred and when the flow to be filtered is heavier than the air, so naturally attracted downwards
ABSAUGHAUBE AUF DUN GRUND HI2P |

ABSAUGHAUBE AUF DUN GRUND HI2P : work on the hood
Building in of the hood in a bench
|
Adapted for filtration where an aspiration from the bottom is needed (for example heavy substances, solvents, etc.)
The workstation is completely clear
Application:
Technical characteristics |
Variable flow
Capacity
L x W x H mm
Weight
Integrated lighting
Power supply
Maintenance
rear exit evacuation |
50 to 450 m3/h
270 W
420 x 350 x 130 mm
9 Kg
Yes
230 V / 50 Hz
Periodic change of the filter
Yes Ø 125 mm |
Dimensions for the frame of the hood: 350 x 420 mm
|
|